Budget Locking Wheel Nuts - 60° Seat
Price:
In stock
SKU:
Budget Locking Wheel Nuts - 60° Seat
Description
Instructions
Auto Inparts Budget Locking Wheel Nuts for Aftermarket Alloy & Steel Wheel wheel fitments and offer a good level of security for the price. The wheel locks are available in either silver or black finishes as specified in the fitment listing below.
The Locking key has both 19mm and 21mm hex sizes to suit most standard wheel braces.
Each pack contains: 4 x wheel locks and 1 x locking key
To view each product below click on the product thumbnail image.
- Ensure the wheel is on stable level ground and the handbrake is applied.
- Remove one original wheel fixing from each wheel.
- Do a visual check comparing the wheel lock and the original wheel fixing, making sure that they have an identical thread and seat and on bolts that the threaded section is the same length.
- Engage the wheel lock key on to the head of the wheel lock and insert this into the wheel and do it up finger tight.
- Ensure the key is fully and securely engaged onto the head of the wheel lock and then tighten it up using a wheel brace. VERY IMPORTANT: Tighten lock to the vehicle manufacturer's recommended torque. Do not over tighten and do not use an impact wrench/air gun (This will invalidate the warranty/guarantee).
- Repeat steps 4 and 5 to fit remaning locks.
- After the first 60 miles/100km, re-check the tightness of the wheel locks and all wheel fixings. We recommend you periodically check the tightness of all wheel fixings.