Forged Wheel Stud- M12 X 1.5 - 50mm - 62mm - 12.2mm - Honda
Price:
Availability:
Manufactured to ISO9001 standards from high grade (30MnB3) high tensile steel with rolled threads for ultimate strength (10.9 tensile strength)
• These studs should be used to replace existing studs that may not be long enough for a particular wheel fitment or wheel/spacer assembly.
• They can also be used for a stud conversion if required for a motor sport application and/or to replace a damaged existing studs.
• The studs are mounted through the back of the wheel hub assembly and the spline diameter and thread length can be seen on the below application list. Before attempting to fit any stud make sure you have the correct size.
• The vehicle applications listed are only a rough guide.
• Original stud mounting holes can be enlarged so that a stud with a larger spline diameter can be fitted.
• Please check sizes carefully when ordering/Supplying/fitting any studs.
• We recommend that a qualified mechanic carries out any stud conversion or stud installation work.
We recommend that any stud that is fitted is secured in to the wheel hub assembly with E-TECH Thread Lock or similar.
Manufactured to ISO9001 standards from high grade (30MnB3) high tensile steel with rolled threads for ultimate strength (10.9 tensile strength)
Vehicle Fitments: Honda
Wheel Stud Dimensions:
THREAD (mm) | M12 x 1.5 |
THREADED LENGTH (mm) (A) |
50mm |
LENGTH INC SPLINE (mm) (B) | 62mm |
SPLINE DIAMETER (mm) (C) | 12.2mm |
HEAD DIAMETER (mm) (D) |
18mm |
HEAD THICKNESS (mm) (E) | 5mm |
COLOUR | Silver |